When purchasing a new Shower Tube, you need to understand its dimensions and materials. We'll also discuss the different types of installation methods.

Dimensions
There are various factors that determine how comfortable a shower will be. First of all, the size of the tube must be large enough for the space that you have. If the shower tube is too small, you should look for a larger one. Also, you should consider the size of the bathroom, especially the shower.

If you plan on installing a free-standing tub, you'll need to measure the length of the space from wall to wall. You'll need to add two inches to each end to account for hidden parts. This measurement will be easier if you have a freestanding bathtub. Make sure to measure it from the same point on both sides. Then, add the additional two inches from both ends to make sure the tube will fit.

Materials
There are several different materials for shower tubes, including ceramic, fiberglass, stone resin, and acrylic. Ceramic tubs are affordable and easily mold-resistant, but they also require additional maintenance. The grout may deteriorate over time and they feel bumpy and uneven. Alternatively, you can use stone resin tubs, which mimic the appearance of natural stone.

Sizes
When deciding on the size of your shower pipes, it's important to consider the amount of water that your tub can handle. You can't simply use one and a half inch drain pipes in a bathtub. The water can overflow and cause major problems for the flooring and subflooring. The right size drain pipe is crucial to keep the water flowing through the shower and away from the tub. A 1.5-inch drain pipe is a good choice for a bathtub since it prevents overflow and keeps the water moving through the tub.

Installation
Before installing a shower tube, you need to remove your bathtub's spout and faucet. You can also install a new bathtub wall with a brass nipple or a male threaded fitting. To make the tub wall and shower arm fit together, use silicone caulk. Attach the spout handle and shower head to the stub out. After installing the tub wall, you need to connect the water supply lines to the shower head pipe.

Start by removing the old tub surround and replace it with the new one. Before installing a new shower tube, you need to cut the drywall 1 inch larger than the rough-in measurements. Cut through the drywall and down to the base trim. Make sure to protect your eyes from the drywall. You can also remove the tub surround panel using the scoring method. Make sure that you don't cut through the insulation.