简体中文
English
Español
عربي
The cleaning and maintenance precautions of the faucet include the following three points:
First. lightly open and lightly close
Don't switch the faucet too hard, just turn it gently. The metal hose of the shower head should be kept in a naturally stretched state, and should not be folded into a dead corner to avoid breaking.
First. lightly open and lightly close
Don't switch the faucet too hard, just turn it gently. The metal hose of the shower head should be kept in a naturally stretched state, and should not be folded into a dead corner to avoid breaking.
Second. Regular cleaning
Even high-quality faucet products must rely on proper cleaning and maintenance to perform their maximum function. The correct method is to wipe with a neutral detergent and a soft cloth. Avoid using alcohol-containing and acidic detergents when cleaning, because they will damage the surface of the faucet.
Even high-quality faucet products must rely on proper cleaning and maintenance to perform their maximum function. The correct method is to wipe with a neutral detergent and a soft cloth. Avoid using alcohol-containing and acidic detergents when cleaning, because they will damage the surface of the faucet.
Third. Develop good cleaning and maintenance habits
1. Because the water contains a small amount of carbonic acid, it is easy to form scale on the metal surface and cause corrosion to the surface of the faucet. Therefore, you should always wipe the surface of the faucet with a soft cotton cloth or sponge with neutral soap, and then dry the surface with a soft cloth. And to clean the water outlet with a screen, clean the impurities and scale in the screen.
2. After taking a shower, it is best to clean the water droplets in the shower head, and then hang it up. Don't put the shower head directly on the switch to form scale. If the limescale has accumulated, use a pencil tip or chopsticks to gently scrape it off, and then wipe it off with a rag.
3. For scale, rust, etc. on the faucet, just wipe the surface with a damp cloth or sponge dipped in a little special detergent, and then wipe it dry with a clean cloth or rinse it off with water. Dip toothpaste with a soft toothbrush or wipe with a scouring pad dipped in toothpaste to remove limescale and oil stains and make the surface of the faucet clean and shiny.
1. Because the water contains a small amount of carbonic acid, it is easy to form scale on the metal surface and cause corrosion to the surface of the faucet. Therefore, you should always wipe the surface of the faucet with a soft cotton cloth or sponge with neutral soap, and then dry the surface with a soft cloth. And to clean the water outlet with a screen, clean the impurities and scale in the screen.
2. After taking a shower, it is best to clean the water droplets in the shower head, and then hang it up. Don't put the shower head directly on the switch to form scale. If the limescale has accumulated, use a pencil tip or chopsticks to gently scrape it off, and then wipe it off with a rag.
3. For scale, rust, etc. on the faucet, just wipe the surface with a damp cloth or sponge dipped in a little special detergent, and then wipe it dry with a clean cloth or rinse it off with water. Dip toothpaste with a soft toothbrush or wipe with a scouring pad dipped in toothpaste to remove limescale and oil stains and make the surface of the faucet clean and shiny.
4. Many people only notice the surface of the faucet when cleaning the faucet, but the inside of the faucet is actually more important. If the water output of the faucet is reduced or the water is crossed, it may be caused by the blockage of the bubbler. The bubbler can be removed, soaked in vinegar, clean the debris with a small brush or other tools, and then reinstalled.
There are many reasons for faucet leakage. If it is just a simple leak, you can fix it yourself. If water leaks at the water outlet, it is caused by the wear of the shaft gasket. Just use pliers to loosen the gland and remove it, and replace it with a new shaft gasket. If water leaks from the gap under the faucet bolt, it is caused by the wear of the triangular gasket in the gland. Take out the triangular gasket inside the gland and replace it with a new one.
