简体中文
English
Español
عربي
When you need water in your life, you only need to unscrew the faucet, but the faucet is used for a long time, and the water flow is often getting smaller and smaller. Even if the valve is opened to the maximum, the water flow is still very small. This is the most common situation. The place is the faucet in the kitchen and bathroom. Originally, the time to pick up a bucket of water is only enough to pick up half of the bucket, which is a delay of time. What is going on?
There are generally three reasons for this kind of problem:
1. The faucet pipe is blocked. The faucet is blocked due to impurities such as sand and rust in the water. At this time, we can close the main valve of the water pipe and the water meter, and then open the water pipe to see which one is blocked. If we only need to dredge the clogged place, the flow of the faucet will become larger. In order to ensure that it can be cleaned in place, the inner filter and gasket can be removed and rinsed. The dirt in the middle of the filter hole can also be pierced with a needle. Reinstall them after cleaning.
1. The faucet pipe is blocked. The faucet is blocked due to impurities such as sand and rust in the water. At this time, we can close the main valve of the water pipe and the water meter, and then open the water pipe to see which one is blocked. If we only need to dredge the clogged place, the flow of the faucet will become larger. In order to ensure that it can be cleaned in place, the inner filter and gasket can be removed and rinsed. The dirt in the middle of the filter hole can also be pierced with a needle. Reinstall them after cleaning.
2. The filter of the faucet is clogged. Generally, if the water flow of the faucet is small, it is because the filter in the faucet is clogged. At this time, we can first twist the mouth of the faucet to remove the filter of the faucet. , We can use a toothpick to poke through the clogged filter, or we can dilute it with white vinegar and soak it. Both of these methods are better, not to mention, and do not need to spend money, it is more appropriate!
3. The faucet itself is caused by a large foreign body, which is relatively rare, but it will inevitably be encountered. When handling, you only need to prepare the wrench for disassembling the faucet. Use a wrench to open the interface under the basin. In fact, most faucets can be turned off with great force by hand to remove the faucet. Of course, the filter head in the front section must also be removed and put aside. Turn the faucet upside down, and pour a bottle of water into it. If the water flowing out from the back end is not smooth, it proves that there is a foreign body in the faucet tube. It can also be cleaned under flushing water to ensure that it can be cleaned in place. Then you can install it back again. Please also check whether the connection is tightened when installing it back to avoid water leakage.
4. It is caused by insufficient water pressure. After our inspection and treatment, if it is found that neither the filter of the faucet nor the water pipe is clogged, and the water flow of the faucet is still relatively small, then there is another possibility It is because the water pressure of the domestic water is not enough. In this case, we can install a domestic self-priming pump/booster pump at the outlet of the water meter. In this way, the water pressure can be increased to a certain extent. The problem of small water flow from the faucet is solved.
Therefore, the faucet must be cleaned and maintained during daily use. Only in this way can the bacteria on the surface be effectively cleared. However, when cleaning, not only the surface is needed, but also the inside of the faucet. The faucet will be inside after a long time. There will be a lot of water stains, and these water stains will produce a lot of bacteria, which is the main cause of bacterial contamination of the water in the faucet, so we also need to pay attention to internal cleaning when cleaning.
