简体中文
English
Español
عربي
If the shower faucet is used for a long time, there will be various clogging phenomena. For example, the accumulated scale, the clogging of sediment, the aging damage of the shower, etc. must be replaced, but there is no need to decide early. Remove the clogged shower faucet and wash the shower head.
1. Three ways to disassemble the shower faucet.
1. The first method is to first close the main valve of the house, then insert a screwdriver under the handle of the faucet, pry it to the left and right, pry it open, slowly and evenly stabilize, remove the valve body.
2. The second method is to close the main water valve or close the angle valve of the shower faucet (if not, close the main water valve), then drain the water in the water pipe, and then unscrew the blue cap on the right handle with a cross Screw loosen the screw inside, remove the handle, then expose the valve body, and then use an adjustable wrench to unscrew the valve body.
3. The third method is to close the main water valve. There is a red and blue mark of about 8mm on the handle of the faucet. Press the button, use a flat-blade screwdriver to loosen the fixing screw counterclockwise, remove the handle, and remove it with an adjustable wrench. For the valve body of the faucet, use a wrench to open the upper cover and take out the ceramic valve body inside.
1. The first method is to first close the main valve of the house, then insert a screwdriver under the handle of the faucet, pry it to the left and right, pry it open, slowly and evenly stabilize, remove the valve body.
2. The second method is to close the main water valve or close the angle valve of the shower faucet (if not, close the main water valve), then drain the water in the water pipe, and then unscrew the blue cap on the right handle with a cross Screw loosen the screw inside, remove the handle, then expose the valve body, and then use an adjustable wrench to unscrew the valve body.
3. The third method is to close the main water valve. There is a red and blue mark of about 8mm on the handle of the faucet. Press the button, use a flat-blade screwdriver to loosen the fixing screw counterclockwise, remove the handle, and remove it with an adjustable wrench. For the valve body of the faucet, use a wrench to open the upper cover and take out the ceramic valve body inside.
2. The skills required to replace the faucet, and the steps to remove the faucet.
1. Turn off the hot and cold water supply of the faucet in the pond, unscrew the nut with an adjustable wrench or pliers wrench, and remove the faucet from the water supply pipe under the pond.
2. If the old device has sprinklers and hoses, remove the sprinklers under the pool to fix the nuts. In addition, please cut off the connection between the hose and the nozzle.
3. Remove the old faucet from the pool, and then clean the pool wall near the faucet installation area.
1. Turn off the hot and cold water supply of the faucet in the pond, unscrew the nut with an adjustable wrench or pliers wrench, and remove the faucet from the water supply pipe under the pond.
2. If the old device has sprinklers and hoses, remove the sprinklers under the pool to fix the nuts. In addition, please cut off the connection between the hose and the nozzle.
3. Remove the old faucet from the pool, and then clean the pool wall near the faucet installation area.
3. How to clean the nozzle.
1. Clean the inside of the sprinkler head: remove the water pipe head connected to the sprinkler head, clean the sprinkler head in the opposite direction of the water from the faucet, pour water into the sprinkler head, block the water inlet, shake vigorously, and quickly discharge the sewage. Repeat this many times. The method is suitable for cleaning the sprinklers of all sprinklers, and it is very simple to clean the interior
2. Clean the shower nozzle: use a needle to open the blocked water outlet one by one.
1. Clean the inside of the sprinkler head: remove the water pipe head connected to the sprinkler head, clean the sprinkler head in the opposite direction of the water from the faucet, pour water into the sprinkler head, block the water inlet, shake vigorously, and quickly discharge the sewage. Repeat this many times. The method is suitable for cleaning the sprinklers of all sprinklers, and it is very simple to clean the interior
2. Clean the shower nozzle: use a needle to open the blocked water outlet one by one.
Generally, the nozzle of the shower faucet is blocked because the tap water contains a small amount of sediment. In the long-term use of the shower faucet, the sediment accumulates, the water outlet of the shower faucet is gradually clogged, and there is also gravel inside the shower. Therefore, the cleaning method can also be formulated for these reasons.
